Loading... Please wait...
Fiber optic patch cord,Fiber optic patch panel,Fiber optic pigtail, since 2001 from China

Our Newsletter

Distribution Style Fiber Optic Cable with Pulling Eye


Product Description

Fiber Optic Cable (Distribution-Style) with Pulling Eye Specification

Fiber optic cable can easily be damaged during installation because it’s so fragile. Protect it from damage by choosing a cable with a pulling eye. The
pulling eye ensures that the strength member of the cable is pulled instead of the fiber core or jacket. Here’s the easy way to pull pre-terminated fiber
cable use the Pulling Eye kit, Pulling eye kits protect pre-terminated fiber optic cables during installation conduits, ducts or risers. Saving time and costs
when install the pre-connectorized multi fiber cable

1. Fibers are terminated with swivel pulling eyes to eliminate cable damage during installation.
2. Choose either a PVC or plenum jacket
3. 6-, 12-, and 24-fiber versions are available
4. All type connectors are available
5. Makes pulling cable through conduits easier.

Tech Specs
Attenuation (Maximum) — 3.75 dB/km @ 850 nm; 1.5 dB/km @ 1300 nm
Bandwidth (Minimum) — 160 Hz/km @ 850 nm; 500 Hz/km @ 1300 nm
Fiber Type — 62.5-μm core, 125-μm cladding
Jacket Material — Orange PVC
Conductor Material — 62.5/125-μm diameter, all-glass, graded-index optical fiber
Bend Radius — 8 cm loaded; 5.3 cm installed
Tensile Strength — 225 lb. (1000 Newtons) short terms, 68 lb. (300 Newtons) long term
Buffering Diameter — 900 μm
Temperature Tolerance — Operating: (-40 to +80°C); Storage: (-40 to +80°C); Installation: (-40 to +80º C)
Outside Diameter —Lie on the patch cords inside the “tube”

You Recently Viewed...