Loading... Please wait...
Fiber optic patch cord, Fiber Optic Cable Manufacturer Since 2001

Our Newsletter


What is a Fiber Optic Converter

Posted on 21st Jun 2013 @ 10:57 AM

Fiber optic converter is equipment which receives data signals, sent via one media, convert the signals and then transmit the signals into another kind of media. Fiber optic media converters convert the signals sent from copper cable to signals that run on the fiber cable, they are copper to fiber or fiber-to-fiber conversion devices. There are single mode fiber optic media converters and multi mode fiber optic converters, for single mode fiber converters, there are dual fiber type and single fiber type which the fiber cable functions both as transmitting media and receiving media, while for multi mode fiber optic media converter, there are only dual fiber types.

Working distance of the fiber optic media converter are different .for typical multimode fiber optic converters, their working distance max is about 2km., for single mode fiber optic media converters, their working distance can be 20km, 40km, 60km, 80km and even up to 120km.

Stand alone fiber optic media converter is a small device with the fiber optic interface and copper cable interface and the power supply adaptor, for the fiber optic interface, SC type is the most commonly used, but there are also FC and ST types. For the Ethernet interface, it is usually one or several UTP cable ports. There are also chassis type fiber optic media converters, typical type is a 19-inch rack-mounted chassis, with 16 slots on it, so that it can fit 16 pcs of chassis type fiber optic media converters. For chassis type fiber optic media converters, they use the same power supply. They function as plug and play and thus is easy to manage.

There are 10/100 base and 10/100/1000 base fiber optic media converter, they can work with 10/100M Ethernet and 10/100/1000M Ethernet. They can function under either half duplex or full duplex mode, and they can auto choose and fit the 10M or 100M or 1000M Gigabit signals.
Product descriptions:
In Today's systems,LANs are becoming larger and more complicated,people are looking for equipment that is cost effective and flexible and easy to manage,the fiber optic media converters play an important role there,they can connect different types of media effetively and seamlessly..Fiber Optic Media Converters are used in the fiber optic network to transform the signals sent from fiber glass to traditional UTP cables, they are typically used in ethernet as physical layer networking eqiupment .Jfiberoptic intl offer 10/100 base fibre optic media converters and 10/100/1000 base fiber optic media converters.
The 10/100M fiber optic media converter mediates between a 10/100Base-Tx segment and a 100Base-Fx segment .
The 10/100/1000M fiber optic media converter mediates mediates between 10/100/1000Base-Tx segment and a 1000Base-Fx segment.

These Fiber media converters can extend the conventional 10M Ethernet or 100M or 100/1000M Fast Ethernet to an optional 20Km-120Km distance via the fast Ethernet Fiber-optical Line. Jiafu fiber optic media converters are high performance, economic and reliable solutions for many applications in LAN network .

10/100 base dual fiber media converters
Description
10/100M dual fiber Optic Media Converter is the conversion equipment of Ethernet optical electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link. These Series fiber optic converters with reasonable price are especially designed for network users.
Main features
1. Auto negotiation function allows UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.
2. UTP port supports MDI / MDI-X auto crossover.
3. Multiple optical interface to be chosen: SC, ST or FC, single mode / multimode.
4. Supporting 1552 Byte packet.
5. Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
6. Design of internal or external power supply for selection by users.
Technical Specifications
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
* MAC address table: 1K
* Connector: UTP: RJ-45 10/100Mbps; Fiber: ST/SC/FC 100Mbps
* Cable: UTP: Cat. 5 UTP (the max distance up to 100m)
Fiber (Multimode): 50/125, 62. 5/125 μ m(the max distance up to 2km or 5km)
Fiber (Single mode): 8. 3/125, 8. 7/125, 9/125, 10/125 μ m(the max distance up to 20 -120km)
* Flow Control
Full Duplex: Supporting standard IEEE802. 3x
Half Duplex: Back pressure
* LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.
* Power: AC 170 ~ 240V; DC 5V.
* Ambient Temperature: 0 ~ 70� C
* Humidity: 5 ~ 90%


10/100 base single fiber media converter
Description
10/100M Single mode Single Fiber Optic Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It could extend traditional 10/100M Fast Ethernet to the distance of 90km through single optical fiber link. It is with stable performance and good quality by adopting latest IC from USA and Taiwan. This fiber optic converter must be used in couples, because the transmitted optical differs from the receive optical in wavelength.
Main features
1. The transmission of channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
2. Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
3. The UTP port supports MDI/MDI-X auto crossover.
4. Supporting 1600 bytes packet for management.
5. Internal circuit of prevented thunder could greatly reduce damage of converters caused by thunderbolt induction.
6. Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link.
7. Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.
Technical Specifications
* Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX;
* MAC addresses table: 1K
* Data buffer: 128K.
* Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: SC, 100Mbps
* Cable: UTP: Cat. 5 UTP cable (the max distance up to100m)
Fiber (Single mode): 8. 3/125, 8. 7/125, 9/125, 10/125 μ M(the max distance up to 90km)
* Flow Control
Full Duplex: IEEE802. 3x
Half Duplex: Back pressure

10/100/1000 base dual fiber media converters
Description
Gigabit Fiber Converter can convert Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link.
Main features
1. Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
2. UTP port supports MDI / MDI-X auto crossover.
3. Supporting the max 1536 byte Ethernet packet.
4. Supporting flow control
5. Adopting internal power supply
Technical Specifications
* Operating standards: IEEE802. 3z/AB 1000Base-T, 1000Base-SX/LX
* MAC address table: 4K
* Data Buffer: 256K
* Connector: UTP: RJ-45, 10/100/1000Mbps, Fiber: SC, 1000Mbps
* Cable UTP: Cat 5e or Cat 6 (the max distance up to 100m) , Fiber (multimode): 50/125, 62. 5/125 μ m (the max distance up to 550/224m) , Fiber (single mode): 8. 3/125, 8. 7/125, 9/12 μ m (the max distance up to 100km)
* Flow control: Full Duplex: IEEE802. 3x flow control ,Half Duplex: Back pressure flow control
* Power: A. C. 220V (170-250V), 50Hz; D. C. 5V, 1A
* Ambient temperature: 0 ~ +50degree
* Storage temperature: -20 ~ +70degree
* Humidity: 5% ~ 90%

10/100/1000 base single fiber media converters
Product Description
Gigabit Single Fiber Converter can convert Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 90km through single optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength.
Main features
1. The transmission of a channel signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber.
2. Auto negotiation function allows UTP port to auto select 10/100/1000M and Full Duplex or Half Duplex
3. The UTP port supports MDI / MDI-X auto crossover.
4. Supporting the max 1536 bytes packets
5. Adopting internal power supply to insure equipment at long-hours work stably.
Technical Specifications
* Operating standards: IEEE802. 3z/AB, 1000Base-T and 1000Base-SX/LX
* MAC address table: 4K
* Data Buffer: 256K
* Connector: UTP: RJ-45, 10/100/1000Mbps; Fiber: SC, 1000Mbps.
* Cable: UTP: Cat. 5e or Cat. 6 (the max distance up to 100m),Fiber (single mode): 8. 3/125, 8. 7/125, 9/125, 10/125 μ m (the max distance up to 90km)
* Flow control:Full Duplex: IEEE802. 3x,Half Duplex: Back pressure
* Power: AC. 220V(170-260V), 50Hz; DC. 5V, 2A
* Ambient temperature: 0 ~ +50� C
* Storage temperature: -20 ~ +70� C
* Humidity: 5% ~ 90%

Single mode to Multi mode Fiber Optic Media Converter
Description
Single mode to Multimode Fiber Optic Media Converter - Single mode to Multimode Fiber Optic Converters are simple and reliable devices for connecting multimode fiber traffic to single mode fiber devices and links. Use these bi-directional media converters individually to connect 100Base-FX multimode and single mode devices, or in pairs at each end of long-distance single mode fiber links. These Fiber Converters are the perfect solution dispersed networks where media conversion required between multimode segments separated by long distances.
Technical Specifications
Conform to the IEEE802.3u 100BASE-TX/FX standards
Connector: FX connector is all SC
Indicator
PWR: Power Indicator
FIBER A,FIBER B
Work mode: full duplex
Wavelength:
Single mode: 1300nm, 1310nm, and 1550nm
Multi modes: 1300nm, 850n
Power supply: 5V DC 1A(External Power)
Work temperature:0-65�C
Storage temperature: -40~70�C
Humidity: 5-90%(non-condensing)

16 Slots Media Converter Chassis
Description
16 Slots Media Converter Chassis -media converter chassis suppliert is acceptable for the most 16
sets of different Media Converter Cards within a rack-mountable chassis which is supplied with
unified power. Installing at the center of network, it can not only reduce the links, simplify the
structure, but also ease for management and maintenance.
it can be tidily placed at any network environment. The external form of RACK is simple and tidy. It
is ready for 10/100Mbps, 10/100/1000Mbps Converter Card to be plugged in, and will be the best
solution of network connections for the continuous development of network.
Main features
1. The power of the Rack can be supplied by the type of single power or dual power. Adopting dual
power supply, the load of each power can be reduced and the life of the power would extend. When one
power supply is at fault, the other one can still work independently. It would enhance the
reliability of the RACK.
2. Supplying the converters or powers to be plugged and played.
3. 2U high: 19 inch standard design
4. It is possessed of stable performance, large capacity of power supply, and ease for management and
maintenance.
Technical Specifications
* Capacity: 16 slots available. Every 10/100M Converter Card occupies one slot, every 10/100/1000M
Converter Card occupies two slots.
* Power input: AC 100~260V, 50~60Hz; Output: DC +5V 12A
* Power protection: Protection from over voltage, over current and short circuit
* Ambient temperature: 0 ~ +50� C
* Storage temperature: -20� C~70� C
* Humidity: 5% ~ 90%
* Dimensions: 485(wide) x 245(length) x 90(high) mm huih