Tag Archives: fiber

Fiber Optic Cable Repairing Method

Fiber optics can repaired by several methods. Splicing allows two fiber optic cables to be joined together. Splicing enables the joining of broken cables or two different types of cables, The process is done with fusion splicing or mechanical splicing.

Fusion Splicing

Fusion splicing joins two cable optic lengths together with electric arc welding. Fusion splices generally cost from $0.50 to $1.50 each (as of 2011). However the splicing machine costs from $15,000 to $50,000 depending upon the level of accuracy required.
Mechanical Splicing

Mechanical splicing is done with a device that fits between two cables being spliced and aligns the fiber ends. Mechanical splices cost between $12 and $50 each. However, the initial investment is $1,000 to $2,000. The choice of the method can be based upon precision. Fusion splicing provides lower feedback reflection and less loss of signal. Some companies use each method depending upon whether precision digital signals are being sent or less precise analog signals.

Patch Cable

In most cases, there will not be sufficient slack in a broken cable to allow splicing without additional cable. After determining that a patch cable will work in the system, a temporary length of cable can be mechanically spliced and laid on the ground if temperatures do not fall below freezing. Outdoor repairs should be done in a temporary shelter, such as a tent, if possible, to protect the work from the elements.

What Is the Difference Between Ethernet & Patch Cables?

Ethernet Is a Protocol

While eight-conductor Ethernet cables with RJ-45 plugs are extremely common (these are the cables that look like over-sized phone cords), Ethernet itself is a protocol standard that defines the way that bits of information travel over a particular medium. The two most common cabled versions of Ethernet are traditional copper cables and fiber-optic cables.

Patch Cables

Most standard copper Ethernet cables are referred to as patch cables. However, ordinary phone cords can be considered patch cables, as well as the RCA and HDMI cables that connect a home TV and stereo system together.

Types

Different Ethernet cables have different names, with “patch cables” being the most common. Some of the differences include the length of the cable as well as the purpose. For example, an Ethernet connection that is designed for speed and/or great distance can be referred to as a “backbone” or “long haul,” even though it may use the exact same type of copper cable that a patch cable uses.

The Difference Between Single Mode & Multimode Fiber Optic Connectors

Fiber optic cables are used in data communications such as telephone lines, cable television and broadband Internet. The cables consist of flexible transparent glass fibers that are connected to electronic devices with modulators. The modulators receive data from the sending device and encode it into light pulses made by LED transmitters in the cable connection. The LED sends the encoded light pulses from one end of the fiber to the other. At the other end of the cable, the light pulses are sent into a detector that converts the data back into it original format before sending it to the receiving device.

Fiber-Optic Connectors

Fiber-optic cables are connected with special connectors or spliced together. Fiber-optic connectors consist of a ferrule, a connector body and a coupling mechanism. The ferrule is a thin cylinder that holds the optic fiber in its hollowed-out center. Fiber-optic connectors can be made out of metal, plastic or ceramic. The connector body is made of plastic or metal. It holds the ferrule and connects to the outer jacket of the cable. The coupling mechanism is the body that holds the connector in place when it is attached to an electronics device. Fiber-optic connectors can be a push-and-click latch clip, a screw-in connector or a turn-and-latch bayonet-style nut connector.

Single Mode and Multimode

The mode of a fiber-optic cable is the path that data or light signals travel through. The core diameter of a multimode-fiber-optic cable is larger than a single-mode-fiber-optic cable. Single-mode cables allow a single wavelength and path for light to travel; multimode fiber is used to patch cable to a desktop or a patch panel to computers or televisions.

Single Mode Connectors

Single-mode connector boots are blue or white. The ferrule of the connector is often made out of zirconia, a type of ceramic. The single-mode ferrule has a smaller hole than the multimode ferrrule, which is not detectable by the naked eye.

Multimode Connectors

Multimode-connector boots are beige or black. The boot is the part of the connector that is covered by a sleeve where the fiber-optic cable ends. The ferrule of a multimode connector can be made out of stainless steel, plastic comp. osite or ceramic zirconia.